A visit with Radhames Rodriguez and Tabacalera El Artista – Cigar Seed to Palate

El Artista


El ArtistaYou may not have heard of Radhames Rodriguez and Tabacalera El Artista or then again maybe you have.  I recently had the opportunity to visit with Radhames Sr. and his son Radhames  Jr. and was given a seed to cigar tour their facility in Tamboril, Santiago, Dominican Republic.  I spent a few days in their factory, walking their farms, exploring their processing facilities, and learning the history and this 60-year-old family operation passed from generation to generation.

It all started back in 1956 when Ramon A. Rodriguez (aka Don Pulita) and his friend Don Jose J. Dominguez., set out to  open a new business in the tobacco industry. Originally named Puros Cibao, it was just a local business based out of a warehouse that sold their brand, with the same name, to the local market. Staffed with 9 craftsmen they produced about  12 thousand cigars month. The brand was a good one and the company continued to experience growth, so much so, that  by the mid 1970’s they were producing over 500 thousand cigars a month.  It didn’t take long for the company to realize that they should be producing raw materials for the numerous cigar factories that started to follow them.

It was 1995, just before the cigar boom, in the Dominican Republic that things started to change. The company changed its name to Tabacalera el Artista S.A. which was representative of the art their employees brought to the premium cigar business. When the boom hit in 1996, the company decided to introduce their  Don Augusto brand to the worldwide market which broke the company’s sales and production expectations.

IMG_8453Tabacalera el Artista has not slowed down. Today they have production capacity of over 60,000 sq ft producing over 60 brands. They plant over 1,400 acres of tobacco a year, on their 677,000 sq ft plantation in the Dominican Republic. They also have farms in Ecuador where they grow wrapper. The company has been growing a national wrapper for the last 5 years and has been developing hybrid leaf also. In total they produce over 7.5 million cigars a year and now employ over 450 employees.

Probably best known for their Exactus brand, Tabacalera El Artista is now ready to roll out a 60th anniversary cigar to celebrate their longevity on the business. Before I left, they provided me some pre-release samples which you can read the review of here. We also will be giving away an Tabacalera el Artista ash tray to one lucky winner. All you need to do to qualify is comment on this article.

Take a stroll with me, as I guide you through Tabacalera El Artista and show you what it takes to bring a cigar to market.

First stop – plantation farm  in Tamboril

Seedlings – Seeds are planted in trays in a green house. Before the seeds are planted the soil is disinfected and to control pests and soil disease and then fertilized and tested. In fact before you enter the green house you have to step into a small pool of water to wash your shoes so as to not bring any contamination in. Once planted, the seeds take roughly 45 days to get to the point where they can be transplanted. During this time the beds are irrigated on a regular basis and constantly checked and controlled for weeds and pests. The process from seed to seedling is roughly 45 days. 


Transplanting and Growth – The next step is the transplanting of the seedlings to the farm, Here is  important to transplant only the healthy strong plants  and dispose of the weaker ones. The seed beds are usually watered to make removal easier and not harm the root system. The seedlings are then moved to the growing area that has been properly treated and prepared. Plants grow at a rapid pace reaching roughly 6 – 9  feet in height with 12-22 leaves  and  produce seed pods at the top that are cut off and used for future growing. During the roughly 2 months it takes to reach a mature plant, the field is bordered with corn plants. Why? Because the corn attracts the same pests as the tobacco plant and they like corn better. The process to reach maturity takes about 2 – 3 months

Priming – Once the plants are mature, the leaves are primed at various stages of growth. This can take days, as the primings are done in stages, starting from the bottom of the plant to the top. There are usually 5 primary primings.

  • Corona – Highest and most aromatic leaf as it gets the most sun.
  • Ligero – Second in height and like the corona leaf it is also aromatic, with higher concentration of strength and flavorful. Ligero tends to have a lower combustibility and is used in filler but needs a Seco  or Viso add to combustibility.
  • Viso – The most balanced of the leaves and makes some of the best filler.
  • Seco – Good burn with a light flavor, used for filler often.
  • Volado – Lowest Leaf on the plant and has the least aroma and the highest concentration of moisture generally mild and thin, Being the lowest they tend to be covered in mud and sand and tend to be used for compost or disposed of. These are sometimes called  “sand lugs” as they are often against the ground and are coated with dirt splashed up when it rains.

Priming can take 2 weeks as each level is done seperately. As they leaves are primed they are sewn together so they can be brought to the barns where they will hang and cure.

Next Stop – The Curing Barn


After we leave the fields we stroll over to the curing barns which have an enticing aroma. Tobacco leaves must be cured to develop their characteristic aroma. The leaves are cured when they have passed from bright green flexible fresh leaves to dried brown or yellowish leaves. Chemically, the naturally occurring chlorophyll in the leaf gradually breaks down and is replaced by carotene. To cure, the harvested plants are strung to narrow strips of wood, called laths. The laths are hung from the ceiling of a well-ventilated curing barn. In dry weather, they may cure simply by hanging, a process called air curing. The leaves may also be flue-cured. In this method, the laths are hung in a small barn which is heated from 90-170°F (32.2-77°C). The temperature must be carefully monitored in order to prevent extreme rapid drying. Sawdust or hardwood may also be burned in the curing barn, to aid in drying the leaves and impart an aroma. 30 – 45 days

Moving onto the Processing Facility


After the leaves are cured, they are gathered and brought to a process facility where they are stacked in pilones which is essentially a carefully constructed pile of tobacco leaf. Before this is done though, the leaves are classified for filler, binder, and wrapper and tied into “hands” of about 30 – 35 leaves. The pilones is essentially a compost heap that starts the fermentation process. This process is perhaps the most important process of the tobacco preparation, as it is where the leaf develops its taste. Temperature is measured  at the center of the pilones and when it reaches from 115 up to 130 degrees F the pilones is broken down and the hands are rotated moving the center leaves to the outside and the outside leaf to the middle and the bottom to the top – this is known as “turning”. The leaf is showered with a clean spray of water and the process continues until the fermentation completes (temperature rise is not detected). Fermentation  is a natural process that develops flavor, color, and actually reduces the amount of nicotine in the leaf.  2 – 3 months.

Sorted again

Now that the leaf has been cured and fermented, the pilones are broken down and the hands are taken to the sorting area where they are taken apart and checked for imperfections like holes in the leaf. The pristine leaf is used primarily for the wrappers.


Before being used in the rolling process the leaf  is stripped of its center vein. This is done by a worker who  clips the vein near the tip and pulls it down. Stripped leaves are laid in piles known as books or pads. The leaf is then wrapped in bales and stored until needed. The baled tobacco does not go through further fermentation but does have a slow aging as it sits in the warehouse. Each bail is marked and stored.

The Factory Floor


Once the bails are selected, the blender creates the formula for the cigar. Each leaf is carefully selected and presented to the Torcedor  for rolling. A Torcedor is a highly skilled and specifically trained cigar roller. The individual leaves are stacked in piles representing the formula.


The Torcedors take the filler tobacco according to the prescribed formula and lay them together and then bunch them by hand. The binder is then applied and the raw binded cigar is placed in molds to create the shape of the particular vitola. These molds are then put in a press to form the shape of the cigar. After the pressing is complete the cigar is then wrapped with the outer leaf. Each torcedor rolls about 300 cigars/day.

Draw Testing

Every cigar is then put through a draw test. This is a special machine that the pre-capped cigar is put in, to test the draw qualities of the cigar.  No cigar leaves the factory without having passed a draw test. This ensures that the cigar does not have a plug in it and guarantees the consumer has a pleasant smoking experience.


After the draw test is complete, the cigars are capped. The cap can be just a small  circle of tobacco that is glued onto the head of the cigar using a vegetable based glue or it may be finished with a pig tail which is the remainder of the wrapper leaf. Caps can also have an additional slice of tobacco that is glued around the bottom of the head before the cap is applied so when the cap is cut, the wrapper has less of a chance to unravel.

Aging Room

Once the cigars are finished they are moved into an aging room where they will rest for 6 months to a year.  This room is like a large humidor, except the temperature is lower than a normal humidor, usually around 50 degrees farenheit. The aging allows the cigar to settle and exhaust any remaining ammonia, before it is banded, boxed and shipped.


Bands are an important part of cigar culture.   They represent the brand and were originally created to keep the fingers from picking up tobacco stains. Today these bands can be anywhere from simple paper to embossed and metallic print with bold colors and designs. Bands have become a collectors item for many consumers and have been used to make art work and furniture tops to show off the smokers enjoyment.

After the cigars are banded they are moved to the packing area where they are either slipped into a cellophane sleeve or left unsleeved.  They are then boxed and sealed for delivery. Boxes, like bands, are a reflection of the brand. The artwork can be very elaborate and many consumers collect them also. Some brand owners opt to ship the cigars as bundles instead of boxing them.  Usually these are the less expensive cigars in their portfolio. You can see our story about making cigar boxes here.


Once the cigars have been boxed and prepped for shipping, they are sent to the shipping area where they are packed and sent to their destination. Once they arrive in the US, they have to pass through customs and an SCHIP (State Children’s Health Insurance Program) tax is paid before they can be moved to the brand owner. Some times the brand owner uses a bonded warehouse where they don’t have to pay the SCHIP tax until they leave the warehouse for the ultimate destination – your favorite Brick and Mortar shop or online retailer. The process of shipping and receiving cigars can take weeks to months to clear through the process.

El Artista

So there you have it. That is the process of getting the cigar from a seed to your palate. I hope you enjoyed reading this as much as I enjoyed following the process. Now when you enter that humidor and select your cigar of choice,  you should have a better appreciation of the time, art, craftsmanship, and  science that goes into creating a cigar. i have been told that roughly 300 sets of hands touch the process from start to finish.

El Artista

Radhames Rodriguez Jr. Boston Jimmie, Radhames Rodriguez Sr.

I would like to thank El  Artisita, and the Rodriguez family, for taking the time to walk me through the process.

El  Artista can be reached at:

Telephone: +1 (809) 580-5282,  +1 (954) 759-2572
Fax: +1 (809) 580-5289
Email: info@elartista.com.do

Av. Presidente Vásquez
115. Tamboril, Santiago.
República Dominicana


On a side note, Radhames Rodriguez Sr. is a championship  dominoes player and has the many trophies to show for it.

32 thoughts on “A visit with Radhames Rodriguez and Tabacalera El Artista – Cigar Seed to Palate

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.